Appliance Aid takes part in the Amazon Associates programme. Some links on this page are affiliate links, and a qualifying purchase earns us a commission. Your price is unchanged.
🏆 RECOMMENDED PART
422200 Dryer Drum Roller Fits for Bosch, Reduces Noise
- Fix a Noisy or Squeaking Dryer：If your dryer makes loud thumping, squeaking, or grinding sounds during the cycle, the 422200 dryer drum support roller is likely worn out. This replacement drum roller supports the drum...
- Direct Replacement for Bosch：Stop guessing which roller fits. This dryer drum support roller is made as a replacement for Bosch. Designed and manufactured strictly in accordance with precise specifications.
- Replace Both Rollers for Best Results：Most dryers use two drum support rollers. If one roller is worn, the other is usually worn as well. This dryer drum support roller lets you swap both at once. Your dryer will run ...
- Restores Smooth Drum Rotation：Worn dryer support rollers let the drum sag or wobble. This replacement drum support roller holds the drum in the correct position while it spins. After the laundry is washed, it can be p...
- Easy Installation：You don't need a repair tech for this dryer drum roller replacement. Unplug your dryer, remove the front panel and drum, pull off the old rollers, slide these new ones onto the shaft, and reassemble....
What the 422200 does
Dryer drum rollers support the drum, allowing it to rotate smoothly during operation. They reduce friction and noise as the drum spins.
Symptoms when this part fails
- Loud squealing or grinding noises from the dryer
- Drum not spinning freely or with difficulty
- Thumping or banging sounds during operation
- Clothes not drying evenly or taking longer
- Dryer stopping mid-cycle unexpectedly
Compatibility
Fits the Bosch family. Specifically:
- Any unit originally equipped with OEM part number(s): 422200.
- Check the model/rating plate inside your appliance and compare it against the fitment table on the product listing before ordering — this guide does not list specific compatible models because Amazon does not provide verified fitment data through this pipeline.
Tools you'll need
- Screwdriver set (Phillips, flathead)
- Nut driver set
- Pliers
- Work gloves
- Flashlight
Difficulty: Moderate · Time: 1-2 hours
How to install the 422200, step by step
- Unplug the dryer from its power source.
- Disconnect the dryer vent hose and move the appliance.
- Remove the top panel and control panel of the dryer.
- Detatch the front panel to access the drum assembly.
- Remove the drive belt and carefully lift out the drum.
- Locate the worn drum rollers and replace them with new ones.
- Reassemble the dryer by reversing the disassembly steps.
- Reconnect power and test the dryer's operation.
Related troubleshooting
If swapping this part doesn't fix the issue, check these next: