How do I know if my dryer drum belt is broken?

A common sign is the dryer motor running but the drum not spinning. You might also hear unusual noises, a burning smell, or find the drum spins too easily by hand. If clothes are not tumbling, the belt is likely the cause.

Can I replace a dryer drum belt myself?

Yes, replacing a dryer drum belt is a common DIY repair. It generally requires basic hand tools and moderate mechanical aptitude. Always ensure the dryer is unplugged and gas supply is off before starting any repair.

What causes a dryer drum belt to break?

Over time, drum belts can wear out due to friction, heat, and constant use. Overloading the dryer, a seized idler pulley, or a worn motor pulley can also put excessive strain on the belt, leading to premature failure.

Dryer Drum Belt Repair: Symptoms, Tools & Installation

Appliance Aid takes part in the Amazon Associates programme. Some links on this page are affiliate links, and a qualifying purchase earns us a commission. Your price is unchanged.

🏆 RECOMMENDED PART

GENUINE Frigidaire 134503600 Drum Belt for Dryer

Works with the following models: Frigidaire AEQ6000CES0, Frigidaire AEQ6000CES1
Works with the following model: Frigidaire AEQ6000ES1
Works with the following model: Frigidaire AEQ6000ES0
Works with the following model: Frigidaire AEQ6000ES
Genuine replacement part

Check Price on Amazon

What the 134503600 does

The dryer drum belt wraps around the drum and motor pulley, transferring power from the motor to rotate the drum. This rotation tumbles clothes during the drying cycle.

Symptoms when this part fails

Dryer runs but drum does not spin
Loud thumping or squealing noise
Burning smell from the dryer
Clothes remain wet after a cycle
Drum spins freely by hand with no resistance

Compatibility

Fits the Frigidaire family. Specifically:

Any unit originally equipped with OEM part number(s): 134503600.
Check the model/rating plate inside your appliance and compare it against the fitment table on the product listing before ordering — this guide does not list specific compatible models because Amazon does not provide verified fitment data through this pipeline.

Tools you'll need

Screwdriver set
Nut driver set
Pliers
Work gloves
Flashlight

Difficulty: Moderate · Time: 30-60 minutes

How to install the 134503600, step by step

Disconnect dryer from power and gas (if applicable).
Remove the dryer's top panel, front panel, or rear panel to access the drum.
Locate the old or broken drum belt and remove it from the drum and motor pulley.
Carefully position the new belt around the dryer drum.
Route the new belt around the motor pulley and idler pulley, ensuring correct tension.
Confirm the belt is properly seated and the drum spins freely by hand.
Reassemble the dryer panels and secure all fasteners.
Reconnect power and test the dryer's operation.

Related troubleshooting

If swapping this part doesn't fix the issue, check these next:

Dryer Not Tumbling But Heating? Fix the Drum or Belt