How many suspension rods does a washer have?

Most top-load washing machines typically use four suspension rods, one located at each corner of the wash tub. These rods work together to balance the tub and absorb shocks during the wash and spin cycles. It is generally recommended to replace all four rods at the same time for optimal performance and balance.

Can I replace just one suspension rod?

While technically possible, it is strongly recommended to replace all suspension rods simultaneously. Over time, all rods experience similar wear, and replacing only one can lead to an imbalance, causing the other older rods to fail prematurely or the washer to vibrate more due to uneven support.

What happens if I don't replace failing suspension rods?

Ignoring failing suspension rods can lead to several problems. The washer may experience severe vibrations, loud noises, and potentially damage other internal components due to excessive movement. This can also result in unbalanced load errors, incomplete wash cycles, and reduced appliance lifespan.

Replace Frigidaire Washer Suspension Rods - Guide

Appliance Aid takes part in the Amazon Associates programme. Some links on this page are affiliate links, and a qualifying purchase earns us a commission. Your price is unchanged.

🏆 RECOMMENDED PART

5304511328 5304511329 4Pcs Washer Suspension Rod Compatible with Frigidaire

【Replace Part】5304511328 5304511329 washer suspension rod and spring assembly replaces the following part numbers: 4584271, AP6261615, EAP12176453, PS12176453. Before purchasing. When problems occur, all four suspensi...
【Excellent Material】5304511328 5304511329 suspension rod kit is compatible with Frigidaire washing machine. This part is side the back of the oven compartment. Product body Dimensions ‎L: 26 x W: 2 x H: 0.5 inches. 53...
【Excellent Performance】5304511328 5304511329 Washer Suspension Rod Set can truly solve the following issues: (1)wabbling or shaking, unbalanced issue (2) spinning errors (3)banging noise,(4)showing "DC"error code. Was...
【Fit Models】5304511328 5304511329 load washer suspension rods is compatible with the following models: FFTW4120SW FFTW4120SW1 FFTW4120SW0
【Assured product】5304511328 5304511329 for Frigidaire washing machine suspension rod element includes 1 × washer suspension rod set. We have a professional team, you are entitled to a product Service lasting 3 years. ...

Check Price on Amazon

What the 4584271 does

Washing machine suspension rods support the wash tub, allowing it to move freely during cycles while dampening vibrations and preventing the tub from hitting the machine's frame.

Symptoms when this part fails

Excessive vibration during spin cycle
Loud banging or thumping noises
Washer tub off-center or sagging
Error codes related to unbalanced load

Compatibility

Fits the Frigidaire family. Specifically:

Any unit originally equipped with OEM part number(s): AP6261615, EAP12176453, PS12176453.
Check the model/rating plate inside your appliance and compare it against the fitment table on the product listing before ordering — this guide does not list specific compatible models because Amazon does not provide verified fitment data through this pipeline.

Also replaces: AP6261615, EAP12176453, PS12176453

Tools you'll need

Pliers
Screwdriver
Work gloves
Flashlight

Difficulty: Moderate · Time: 30-60 minutes

How to install the 4584271, step by step

Disconnect washer from power and water supply.
Remove the washer's top panel.
Locate the suspension rods at each corner of the tub.
Lift the tub slightly and unhook the old rod from the frame and tub.
Install the new rod, ensuring it's securely attached at both ends.
Repeat for all other rods.
Reattach the top panel.
Reconnect power and water, then test the washer.