What is the purpose of an oven gas valve safety solenoid?

It acts as a critical safety shut-off, allowing gas to flow to the burner only when the oven control board signals it to open. If power is lost or a fault occurs, it closes to prevent uncombusted gas from escaping into your home.

How can I test if my gas valve safety solenoid is faulty?

With power disconnected, you can use a multimeter to check for continuity or resistance across the solenoid's terminals. A lack of continuity, an open circuit, or an incorrect resistance reading compared to specifications usually indicates a failed solenoid.

Is it safe to replace an oven gas valve safety solenoid myself?

Replacing this part involves working with both electricity and natural gas, which carries inherent risks. If you are not comfortable or experienced with such repairs, it is highly recommended to seek assistance from a qualified appliance technician to ensure safety and proper function.

Oven Gas Valve Safety Solenoid Replacement Guide

Appliance Aid takes part in the Amazon Associates programme. Some links on this page are affiliate links, and a qualifying purchase earns us a commission. Your price is unchanged.

🏆 RECOMMENDED PART

[WB19K31 Gas Valve OEM Mania] 183D5746G001 Y-30128-AF77 New OEM Produced for Gas Range Oven Safety Valve Replacement for NC-4125-5 for Elect

Press Ctrl + F to search your model number and check compatibility. You can find compatible model numbers by brand in the middle of this page description.
Precise Electrical Rating , Operates at 3.3,3.6 Amps, 60 Hz, ensuring stable gas flow control.
Durable Build & Fit , Features a 9/16-24 UNEF-2B inlet for 3/8" tubing with secure loxit fitting.
Easy Installation , Includes 1 mounting bracket and (2) female terminals compatible with .250 × .032 tab connectors.
Reliable Ignition System , Designed for Norton Igniter type applications, providing safe and consistent ignition.

Check Price on Amazon

What the WB19K31 does

The gas valve safety solenoid is an electromagnetic component that controls the flow of gas to the oven burner. It opens to allow gas when energized by the control board and closes to shut off gas flow for safety.

Symptoms when this part fails

Oven not heating
Burner not igniting
Gas smell without ignition
Weak or inconsistent flame
Oven takes too long to preheat

Compatibility

Fits the Frigidaire family. Specifically:

Any unit originally equipped with OEM part number(s): WB19K31.
Check the model/rating plate inside your appliance and compare it against the fitment table on the product listing before ordering — this guide does not list specific compatible models because Amazon does not provide verified fitment data through this pipeline.

Tools you'll need

Screwdriver set
Nut driver set
Adjustable wrench
Multimeter
Work gloves

Difficulty: Moderate · Time: 45-90 minutes

How to install the WB19K31, step by step

Disconnect power and turn off the gas supply to the oven.
Access the gas valve assembly, typically by removing the oven's back or bottom panel.
Carefully disconnect the electrical wires from the old solenoid.
Unscrew and remove the old safety solenoid from the gas valve.
Install the new solenoid, ensuring proper alignment and secure mounting.
Reconnect all electrical wiring to the new solenoid.
Restore gas and electrical power, then check for leaks and proper oven operation.

Related troubleshooting

If swapping this part doesn't fix the issue, check these next: