What causes washing machine tub bearings to fail?

Tub bearings typically fail due to wear over time, often exacerbated by water leaks from a faulty tub seal. Detergent residue and unbalanced loads can also contribute to premature wear and tear on the bearings, leading to noise and performance issues.

Can I replace just one bearing or do I need a kit?

Most washing machine tub bearing repairs involve replacing both the inner and outer bearings, along with the tub seal, as a kit. This ensures all critical components in the bearing assembly are new, preventing future failures and ensuring optimal performance and longevity.

Is replacing tub bearings a difficult repair?

Replacing tub bearings is generally considered an advanced repair. It requires significant disassembly of the washing machine, including removing the wash tub, and often specialized tools to extract and install the bearings. It can be time consuming for an inexperienced DIYer.

Washing Machine Tub Bearing Kit Replacement

Appliance Aid takes part in the Amazon Associates programme. Some links on this page are affiliate links, and a qualifying purchase earns us a commission. Your price is unchanged.

🏆 RECOMMENDED PART

Moker Washer Tub Bearings and Seal Kit for Samsung,w/Step by Step Guide

[ULTIMATE REPAIR SOLUTION] Specifically designed to fix noisy spin cycles, excessive shaking, and water leaks. This kit replaces the core components that cause "jet engine" noises and drum instability.
[heavy duty PRECISION] Features high quality CNC-machined steel bearings with double-layer silicone seals. These are dustproof, waterproof, and designed to handle high-speed spin cycles without wearing down.
[DIY-FRIENDLY & COST EFFECTIVE] Skip the $150/hour service call. This all-in-one kit provides everything a homeowner needs to perform a professional-grade rebuild and restore the machine to a smooth, quiet operation.
[BROAD COMPATIBILITY] Fits a massive range of Samsung Front Load Washers including series WF393, WF395, WF405, WF42H, and WW22N. Replaces OEM Part #s: DC62-00156A, 6601-000148, 6601-002637, 6601-002632, and 6601-002516.
Compatible Modes: The washer bearing and seal replacement parts is compatible for following Samsung WF393BTPARA/A1, WF393BTPARA/A2, WF393BTPAWR/A1, WF393BTPAWR/A2, WF395BTPARA/A1, WF395BTPARA/A2, WF395BTPASU/A2, WF395...

Check Price on Amazon

What the DC62-00156A does

Tub bearings allow the inner wash tub to spin smoothly and quietly within the outer tub. They support the tub's rotation during spin cycles.

Symptoms when this part fails

Loud grinding or roaring noise during spin cycle
Excessive vibration or shaking of the washer
Water leaking from the bottom of the washer
Tub wobbles excessively when moved by hand

Compatibility

Fits the GE family. Specifically:

Any unit originally equipped with OEM part number(s): DC62-00156A.
Check the model/rating plate inside your appliance and compare it against the fitment table on the product listing before ordering — this guide does not list specific compatible models because Amazon does not provide verified fitment data through this pipeline.

Tools you'll need

Screwdriver set
Socket wrench set
Pliers
Hammer
Bearing puller

Difficulty: Advanced · Time: 2-4 hours

How to install the DC62-00156A, step by step

Disconnect power and water supply to the washer.
Remove the washer cabinet and top panel.
Disconnect hoses, wiring, and remove the wash tub assembly.
Carefully remove the old bearings and seal from the tub or transmission housing.
Install new bearings and seal, ensuring proper seating.
Reassemble the wash tub and reconnect all components.
Reinstall the washer cabinet and panels.
Reconnect power and water, then test for leaks and proper operation.

Related troubleshooting

If swapping this part doesn't fix the issue, check these next:

Best way to clean a washing machine detergent dispenser (10-min deep clean)