How do I know if the solenoid is faulty?

A multimeter can be used to test the solenoid's continuity. If it shows an open circuit or incorrect resistance, it may be faulty. Common symptoms like the oven not heating or the burner failing to ignite also suggest a potential issue with the solenoid.

Is it safe to replace the gas valve safety solenoid myself?

Working with gas lines requires extreme caution. If you are not comfortable or experienced with gas appliance repairs, it is recommended to consult a qualified technician to ensure safety and proper installation.

Can a faulty solenoid cause a gas leak?

While a faulty solenoid typically prevents gas from flowing, a physical defect or improper installation could potentially lead to a leak. Always check for gas leaks with an approved leak detection solution after any gas line work.

Oven Gas Valve Safety Solenoid Repair Guide

Appliance Aid takes part in the Amazon Associates programme. Some links on this page are affiliate links, and a qualifying purchase earns us a commission. Your price is unchanged.

🏆 RECOMMENDED PART

GE WB19K10044 Genuine OEM Valve and Pressure Regulator for GE Gas Range/Stove/Ovens

The GE Appliances WB19K10044 Valve and Pressure Regulator is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact specifications
Replacement GE Appliances Range/Stove/Oven Valve and Pressure Regulator controls the gas supply to the oven burners
GE Appliances WB19K10044 Range/Stove/Oven Valve and Pressure Regulator is also called the Gas Pressure Regulator and Oven Safety Valve Assembly
High quality GE Appliances OEM WB19K10044 Range/Stove/Oven Valve and Pressure Regulator is manufactured with premium materials for durability and exact fit, be sure to follow instructions in owners manual when install...
Repair your appliance with confidence when you choose Genuine GE Appliances Parts & Accessories

Check Price on Amazon

What the WB19K10044 does

The gas valve safety solenoid controls the flow of natural gas or propane to the oven's burner. It acts as a safety shut-off, preventing gas from flowing if certain conditions are not met, such as proper ignition.

Symptoms when this part fails

Oven not heating
Pilot light won't stay lit
No gas smell, but oven won't ignite
Burner ignites then immediately goes out
Error code related to gas supply

Compatibility

Fits the GE family. Specifically:

Any unit originally equipped with OEM part number(s): WB19K10044.
Check the model/rating plate inside your appliance and compare it against the fitment table on the product listing before ordering — this guide does not list specific compatible models because Amazon does not provide verified fitment data through this pipeline.

Tools you'll need

Screwdriver set
Nut driver set
Adjustable wrench
Multimeter (for testing)
Thread sealant (gas rated)

Difficulty: Moderate · Time: 30-60 minutes

How to install the WB19K10044, step by step

Disconnect power and gas supply to the oven.
Access the gas valve assembly, typically by removing the oven's back panel or bottom panel.
Carefully disconnect the electrical wires from the solenoid.
Use a wrench to unthread and remove the old solenoid from the gas valve.
Apply thread sealant to the new solenoid if necessary and thread it into place.
Reconnect the electrical wires to the new solenoid.
Restore gas and power, then test for leaks and proper operation.

Related troubleshooting

If swapping this part doesn't fix the issue, check these next: