Refrigerator Door Hinge Replacement Guide

What the WR13X10020 does

A refrigerator door hinge allows the door to pivot open and close smoothly. It supports the weight of the door and maintains a proper seal when closed.

Symptoms when this part fails

• Door sags or does not close properly
• Gap in door seal
• Squeaking or grinding noise when opening/closing
• Door feels loose or wobbly
• Frost buildup inside refrigerator

Compatibility

Fits the GE family. Specifically:

• Any unit originally equipped with OEM part number(s): SWR13X0576, WR2X4901, ;WR49X5099.
• Check the model/rating plate inside your appliance and compare it against the fitment table on the product listing before ordering — this guide does not list specific compatible models because Amazon does not provide verified fitment data through this pipeline.

Also replaces: SWR13X0576, WR2X4901, ;WR49X5099

Tools you'll need

• Screwdriver set
• Nut driver set
• Pry tool or putty knife
• Adjustable wrench

Difficulty: Moderate · Time: 45-75 minutes

How to install the WR13X10020, step by step

1. Disconnect refrigerator from power source.
2. Carefully remove items from door shelves.
3. Support the refrigerator door and remove hinge screws.
4. Lift the door off its bottom hinge pin.
5. Remove the old hinge and install the new hinge.
6. Carefully re-align and re-install the door onto hinge pins.
7. Secure all hinge screws and test door operation.
8. Reconnect power and check door seal.

Related troubleshooting

If swapping this part doesn't fix the issue, check these next:

• Refrigerator Not Cooling But Light Is On? DIY Troubleshooting Guide
• Upstreman 3.2 Cu.Ft Mini Fridge Review: My Expert Analysis
• Refrigerator ice maker not making ice? 7 fixes for Whirlpool, Samsung, LG, GE and more