How do I know if my safety solenoid is bad?

Common signs include the oven not heating, the burner not igniting despite the igniter glowing, or intermittent heating. A multimeter can be used to test for continuity or proper voltage supply to the solenoid. If the igniter glows but no gas flows, the solenoid is a likely suspect for failure.

Can I replace just the solenoid or do I need a whole new gas valve?

Often, the safety solenoid is a separate, replaceable component of the gas valve assembly. If only the solenoid is faulty, replacing just that part is usually sufficient and more cost effective than replacing the entire gas valve. Consult your oven's parts diagram to confirm if it's individually replaceable.

Is it safe to replace a gas oven part myself?

Repairing gas appliances requires careful attention to safety. Always disconnect both power and gas supply before starting work. After reassembly, thoroughly check for gas leaks using a soapy water solution. If you are uncomfortable with the process or working with gas, it is recommended to consult a qualified technician.

Gas Valve Safety Solenoid Repair Guide | Appliance Aid

Appliance Aid takes part in the Amazon Associates programme. Some links on this page are affiliate links, and a qualifying purchase earns us a commission. Your price is unchanged.

🏆 RECOMMENDED PART

Gas Range Oven Safety Valve Replaces For Kenmore 79071313701 79070503013 79073433314 79071313705 79073433312 79073039311 79072042300 7907060

Package included: 1x Safety Valve as the picture .
Compatibility: this is aftermarket replace for Frigidaire, Tappan, Kenmore, Crosley Range.
Model Compatibility: Fit for 79071313701 79070503013 79073433314 79071313705 79073433312 79073039311 79072042300 79070603010 79070402012 79071202700
Identify the model:USE Ctrl + F to SEARCH your model number inside the Product Description
Note: If you are not sure about the compatibility please contact us for advice. we will solve your problem within 24 hours

Check Price on Amazon

What the 79073433314 does

The gas valve safety solenoid controls the flow of gas to the oven burner. It opens to allow gas when heat is requested and closes to prevent gas flow if ignition fails, ensuring safe operation.

Symptoms when this part fails

Oven not heating at all
Oven burner not igniting (igniter glows but no flame)
Intermittent oven heating or cycling off prematurely
Oven preheats very slowly or inconsistently

Compatibility

Fits the Kenmore family. Specifically:

Any unit originally equipped with OEM part number(s): 79071313705.
Check the model/rating plate inside your appliance and compare it against the fitment table on the product listing before ordering — this guide does not list specific compatible models because Amazon does not provide verified fitment data through this pipeline.

Also replaces: 79071313705

Tools you'll need

Screwdriver set
Nut driver set
Pliers
Multimeter
Work gloves

Difficulty: Moderate · Time: 30-60 minutes

How to install the 79073433314, step by step

Disconnect power and turn off the gas supply to the oven.
Access the oven's gas valve assembly, typically by removing the bottom panel and burner.
Carefully disconnect the electrical wiring from the old safety solenoid.
Unscrew and remove the faulty safety solenoid from the gas valve.
Attach the new solenoid to the gas valve, ensuring a secure and proper fit.
Reconnect the electrical wiring to the new solenoid.
Reassemble the oven panels and burner.
Restore gas and power, then check for gas leaks with soapy water and test oven function.

Related troubleshooting

If swapping this part doesn't fix the issue, check these next: