What causes a spark electrode to fail?

Spark electrodes can fail due to normal wear and tear over time, often from carbon buildup, cracks in the ceramic insulator, or a weakened internal wire. Grease or food spills can also damage the electrode, preventing it from producing a consistent spark.

Can I clean a spark electrode instead of replacing it?

Sometimes, carbon buildup can be carefully removed with a brush or fine sandpaper to restore function. However, if the ceramic is cracked or the electrode itself is visibly damaged, cleaning is unlikely to resolve the issue, and replacement is recommended for reliable operation.

Is it safe to use an oven with a faulty spark electrode?

Using an oven with a faulty spark electrode can be unsafe. If the electrode fails to ignite gas, unburnt gas can accumulate, posing a fire or explosion hazard. It is best to address the issue promptly and avoid using the oven until the repair is complete.

Oven Spark Electrode Replacement Guide

Appliance Aid takes part in the Amazon Associates programme. Some links on this page are affiliate links, and a qualifying purchase earns us a commission. Your price is unchanged.

🏆 RECOMMENDED PART

MENSI Spark Electrode PD00001608 (Mfg #WB13K18) Compatible with Some Models of GE,Hotpoint,Kenmore Range Stove, 2Pcs

Replacement For OEM Model WB13K18 Spark Electrode Compatible with GE,Hotpoint,Kenmore Range Stove, But Not For All Models.
Compatible Models : WB13K0018, Hotpoint, PS231276, 244916, EA231276, AH231276
Replacement of Ultra Durable Replacement Electrode for General Electric Stove/Range, Pack include 2
Compatible for WB13K0018 Model Spark Electrode, But Not universal for All GE range. you must compare the suitable models in the description list, if not include then means not fits.
Pack include 2 Pieces of sparker.

Check Price on Amazon

What the SMT-DHZ010C-002 does

The spark electrode in a gas oven creates an electrical spark to ignite the gas flowing to the burner.

Symptoms when this part fails

Burner will not light
Weak or intermittent spark
Clicking sound without ignition
Gas smell without flame

Compatibility

Fits the Kenmore family. Specifically:

Any unit originally equipped with OEM part number(s): SMT-DHZ010C-002.
Check the model/rating plate inside your appliance and compare it against the fitment table on the product listing before ordering — this guide does not list specific compatible models because Amazon does not provide verified fitment data through this pipeline.

Tools you'll need

Screwdriver
Pliers
Work gloves
Flashlight

Difficulty: Moderate · Time: 30-60 minutes

How to install the SMT-DHZ010C-002, step by step

Disconnect oven from power and gas supply.
Remove oven racks and bottom panel.
Locate the faulty spark electrode near the burner.
Disconnect the electrode wire and mounting screws.
Carefully remove the old electrode.
Install the new electrode, securing it with screws.
Reconnect the electrode wire.
Replace the bottom panel and oven racks.
Reconnect power and gas, then test the oven.