How do I know if my broil element is bad?

Common indicators of a faulty broil element include the element not heating, visible damage like cracks or blisters, or the oven failing to broil food properly. A multimeter can be used to test for continuity, which will confirm if the element's circuit is open.

Can I replace an oven broil element myself?

Replacing a broil element is often a manageable DIY task for individuals comfortable with basic tools and electrical safety.

What causes a broil element to fail?

Broil elements can fail due to several reasons, including regular wear and tear over time, voltage fluctuations, physical damage from impacts, or manufacturing defects. Excessive heat cycling can also contribute to material fatigue and eventual failure.

Oven Broil Element Replacement | Appliance Aid

Appliance Aid takes part in the Amazon Associates programme. Some links on this page are affiliate links, and a qualifying purchase earns us a commission. Your price is unchanged.

🏆 RECOMMENDED PART

Genuine Edgewater Parts MEE62306504, AP6337106 Bake Element for LG Oven +++ Please Check Your Oven Model Number+++ Dimemsions - 14'' Width,

✅ Edgewater Parts MEE62306504, AP6337106 Bake Element Compatible With LG Range
✅ Replaces: AP6337106, MEE62306501
✅ Dimemsions - 14'' Width, 19'' Length
✅ Be sure to check your model number to ensure compatibility

Check Price on Amazon

What the MEE62306504 does

The broil element generates intense heat from the top of the oven cavity for broiling food. It typically cycles on and off to maintain the set temperature during the broil function.

Symptoms when this part fails

Oven not broiling or heating from the top
Broil element not glowing red
Visible damage to the element, such as cracks or blisters
Food not cooking evenly during broiling
Element sparking or arcing

Compatibility

Fits the LG family. Specifically:

Any unit originally equipped with OEM part number(s): AP6337106, MEE62306501.
Check the model/rating plate inside your appliance and compare it against the fitment table on the product listing before ordering — this guide does not list specific compatible models because Amazon does not provide verified fitment data through this pipeline.

Also replaces: AP6337106, MEE62306501

Tools you'll need

Screwdriver (Phillips or flathead)
Nut driver
Pliers
Work gloves
Multimeter (optional)

Difficulty: Moderate · Time: 30-60 minutes

How to install the MEE62306504, step by step

Disconnect power to the oven at the circuit breaker or by unplugging it.
Open the oven door and locate the broil element at the top of the oven cavity.
Remove the screws securing the element to the oven's ceiling or back wall.
Carefully pull the element forward to access the electrical terminals.
Disconnect the wires from the element terminals, noting their original positions.
Connect the wires to the corresponding terminals on the new broil element.
Push the new element into place and secure it with the mounting screws.
Restore power to the oven and test the broil function to confirm proper operation.