How can I test if the gas valve safety solenoid is faulty?

A multimeter can be used to test the solenoid's continuity and resistance. Consult your appliance's service manual for specific resistance values. A lack of continuity or incorrect resistance indicates a potential failure. Always ensure power and gas are disconnected before testing.

What causes a gas valve safety solenoid to fail?

Common causes include normal wear and tear over time, electrical issues such as power surges, or overheating. The internal coil can burn out, preventing the solenoid from opening or closing the gas valve correctly.

Is it safe to replace an oven gas valve solenoid myself?

Replacing a gas valve solenoid involves working with both electricity and gas. If you are not comfortable with these components, it is recommended to consult a qualified appliance technician. Always prioritize safety by disconnecting power and shutting off the gas supply.

Oven Gas Valve Solenoid Repair | Symptoms & Replacement

Appliance Aid takes part in the Amazon Associates programme. Some links on this page are affiliate links, and a qualifying purchase earns us a commission. Your price is unchanged.

🏆 RECOMMENDED PART

【UPGRADED】BlueStars 279834 Dryer Gas Valve Ignition Solenoid Coil Kit

100% LIFETIME PROTECTION: Enjoy reliable performance with our lifetime protection, ensuring that your product will always be covered for any defects or issues that may arise.
IMPORTANT NOTE: Please check the model number carefully before ordering. You can send us your dryer model number, we can help you confirm if it fits or not.
MODEL NUMBER: 279834 Dryer Gas Valve Ignition Solenoid Coil Kit. This part features a 3-terminal boost/hold coil and a 2-terminal secondary coil.
PART NUMBERS: This 279834 Gas Valve Ignition Solenoid Coil Kit replaces part numbers: PS334310, AP3094251, 3479, 279834, 12001349, 14201336, 14201452, 14202750, 14205025, 14210032, 14210725, 14210908, 279834, 279834BU...
HIGH COMPATIBILITY: Compatible with most top name brands (Whirlpool, Kenmore, Maytag, Speed Queen, Amana, KitchenAid, Norge, Roper, Crosley, Magic Chef, Admiral, Estate, Inglis, Jenn-Air, Hoover, International). Fits ...

Check Price on Amazon

What the 279834 does

The gas valve safety solenoid in an oven controls the flow of natural gas or propane to the burner. It opens and closes based on electrical signals from the oven's control system, ensuring gas is only supplied when ignition is safe.

Symptoms when this part fails

Oven does not heat at all
No gas smell or ignition when oven is on
Weak or inconsistent burner flame
Oven takes a long time to preheat
Clicking sounds without ignition

Compatibility

Fits the Maytag family. Specifically:

Any unit originally equipped with OEM part number(s): PS334310, AP3094251, 12001349.
Check the model/rating plate inside your appliance and compare it against the fitment table on the product listing before ordering — this guide does not list specific compatible models because Amazon does not provide verified fitment data through this pipeline.

Also replaces: PS334310, AP3094251, 12001349

Tools you'll need

Screwdriver set (Phillips and flathead)
Nut driver or small wrench set
Multimeter (for testing)
Work gloves

Difficulty: Moderate · Time: 45-90 minutes

How to install the 279834, step by step

Disconnect the oven from electrical power.
Shut off the gas supply to the oven.
Access the oven's gas valve assembly, typically located behind the lower panel.
Carefully disconnect wires and remove the faulty solenoid from the gas valve.
Install the new gas valve safety solenoid, ensuring secure electrical connections.
Reassemble access panels and reconnect the gas supply.
Turn on the gas supply and check for leaks using a soapy water solution.
Restore electrical power and test oven operation.

Related troubleshooting

If swapping this part doesn't fix the issue, check these next: