How can I test if my dryer door switch is bad?

You can test a dryer door switch for continuity using a multimeter. First, unplug the dryer and disconnect the wires from the switch. Set your multimeter to the continuity setting. The switch should show continuity (a closed circuit) when its plunger is depressed (mimicking a closed door) and no continuity (an open circuit) when the plunger is released (open door). If it fails this test, the switch is likely faulty.

Is it safe to bypass a dryer door switch?

Bypassing a dryer door switch is not recommended for safety reasons. Always replace a faulty door switch with a new, compatible part rather than attempting to bypass it.

Can a faulty door switch cause a dryer to overheat?

A faulty door switch typically prevents the dryer from starting or causes it to stop during a cycle. It is generally not a direct cause of a dryer overheating. Overheating issues are more commonly related to problems with the heating element, thermostat, thermal fuse, or restricted airflow within the dryer's ventilation system. If your dryer is overheating, investigate those components.

Dryer Door Switch Replacement Guide

Appliance Aid takes part in the Amazon Associates programme. Some links on this page are affiliate links, and a qualifying purchase earns us a commission. Your price is unchanged.

🏆 RECOMMENDED PART

DC64-00828B DC64-00828A Dryer Door Switch Compatible with Samsung Kenmore

【product description】DC64-00828B dryer door switch. This is a new GENUINE door switch replacement part
【Quality product】This DC64-00828B dryer door switch is made of high quality materials. It is more wear-resistant and waterproof. Fully tested, fits perfectly and lasts longer
【Replaceable Models】The DC64-00828B dryer door switch standard replaces these parts: DC64-00828A, 2071594, 2071595, AP4045380, AP4578931, EAP4210964, EAP4210965, PS4210964, PS4210965, ASM68666, PD00028436, 737534566497
【Compatible Brands】The DC64-00828B door switch is perfectly compatible with Samsung, Kenmore dryer. Not sure if it's compatible with your dryer? Welcome to email us your dryer model
【After-sale Service】For any quality issues, you can request to send a new one or a refund. What you buy is not only a product, but also a whole set of our after-sales service. Any questions, just one email, we will al...

Check Price on Amazon

What the DC64-00828B does

The dryer door switch detects if the dryer door is closed and latched, allowing the dryer to operate only when the door is securely shut. It acts as a safety mechanism to prevent the dryer from running with an open door.

Symptoms when this part fails

Dryer will not start
Dryer stops mid-cycle unexpectedly
Dryer starts with the door open
Dryer makes a clicking sound but does not tumble

Compatibility

Fits the Samsung family. Specifically:

Any unit originally equipped with OEM part number(s): DC64-00828B.
Check the model/rating plate inside your appliance and compare it against the fitment table on the product listing before ordering — this guide does not list specific compatible models because Amazon does not provide verified fitment data through this pipeline.

Tools you'll need

Phillips head screwdriver
Flathead screwdriver
Nut driver
Needle nose pliers
Multimeter (for testing)

Difficulty: Moderate · Time: 30-60 minutes

How to install the DC64-00828B, step by step

Unplug the dryer from its power source.
Open the dryer door and locate the door switch, typically near the door opening.
Remove any screws or panels securing the front of the dryer or the switch itself.
Carefully disconnect the electrical wires from the old door switch.
Remove the old door switch from its mounting position.
Connect the electrical wires to the terminals of the new door switch.
Secure the new switch in place and reassemble any removed panels.
Close the dryer door and plug the dryer back into its power source to test.

Related troubleshooting

If swapping this part doesn't fix the issue, check these next:

Dryer not heating up but runs? 6 fixes for Whirlpool, Samsung, LG, GE and more