How can I test if my dishwasher heating element is bad?

A heating element can be tested for continuity using a multimeter. With power disconnected, remove the wires from the element terminals. Place the multimeter probes on each terminal. A reading of infinity or no continuity indicates a failed element.

Why do dishwasher heating elements fail?

Heating elements can fail due to regular wear and tear over time, mineral buildup from hard water, or damage from foreign objects. Overheating or electrical shorts can also cause the element to burn out.

Is it safe to run a dishwasher with a broken heating element?

While the dishwasher might still run, it will not heat water or dry dishes effectively. It is generally safe to operate, but for optimal performance and to prevent potential electrical issues, replacement is recommended.

Replace Samsung Dishwasher Heating Element - Appliance Aid

Appliance Aid takes part in the Amazon Associates programme. Some links on this page are affiliate links, and a qualifying purchase earns us a commission. Your price is unchanged.

🏆 RECOMMENDED PART

DD47-00008A Dishwasher Heating Element/Heater (120V 1100W) for Samsung DW80F600 Series, DW80F800 Series, DW80J3020 Series, DW80K5050 Series,

►PARTS DESCRIPTION: Dishwasher Heating Element / Heater
►GENUINE: From Genuine OEM Replacement Parts
►OEM PART #: DD47-00008A
►MANUFACTURER PART #: IRCA 120V 1100W
►COMPATIBLE MODELS LIST: DW80F600UTB/AA, DW80F600UTB/AC, DW80F600UTS/AA, DW80F600UTS/AC, DW80F600UTW/AA, DW80F600UTW/AC, DW80F800UWS/AA, DW80F800UWS/AC, DW80J3020UB/AA, DW80J3020UB/AC, DW80J3020US/AA, DW80J3020US/AC, ...

Check Price on Amazon

What the DD47-00008A does

The heating element in a dishwasher is responsible for heating the water during wash cycles to improve cleaning performance. It also assists in the drying process by heating the air inside the tub.

Symptoms when this part fails

Dishes are not dry at the end of a cycle
Water in the dishwasher does not get hot
Dishwasher displays a heating error code
Wash cycle takes longer than usual
Element appears visibly burnt or damaged

Compatibility

Fits the Samsung family. Specifically:

Any unit originally equipped with OEM part number(s): DD47-00008A.
Check the model/rating plate inside your appliance and compare it against the fitment table on the product listing before ordering — this guide does not list specific compatible models because Amazon does not provide verified fitment data through this pipeline.

Tools you'll need

Phillips head screwdriver
Nut driver set
Pliers
Multimeter (for testing)
Work gloves

Difficulty: Moderate · Time: 45-90 minutes

How to install the DD47-00008A, step by step

Disconnect power to the dishwasher at the circuit breaker.
Turn off the water supply valve to the dishwasher.
Remove the lower access panel or kick plate.
Locate the heating element connections underneath the tub.
Disconnect wiring and mounting nuts from the old element.
Remove the old heating element from inside the tub.
Install the new heating element and secure connections.
Reassemble panels, restore power and water, then test.