How do I know if my broil element is bad?

Common signs include the element not glowing red, visible physical damage like breaks or blisters, or the oven failing to broil food effectively. You might also notice uneven cooking or longer broiling times. A multimeter can be used to test for continuity.

Can I replace a broil element myself?

Replacing a broil element is a common DIY repair for those comfortable working with basic tools and electrical connections. Always ensure the oven's power is completely disconnected before starting any repair work to prevent electrical shock.

What causes a broil element to fail?

Over time, repeated heating and cooling cycles can cause the metal alloy in the element to become brittle and eventually break. Physical impact, such as accidentally hitting it with cookware, can also damage the element.

Samsung Oven Broil Element Repair Guide

Appliance Aid takes part in the Amazon Associates programme. Some links on this page are affiliate links, and a qualifying purchase earns us a commission. Your price is unchanged.

🏆 RECOMMENDED PART

DG47-00068A Broil Element Compatible with samsung Electric Range

►►The DG47-00068A heating element features an internal resistance wire, magnesium oxide powder coating, a 304 stainless steel shell, insulating filler, and end insulation. This range broil element boasts a long lifesp...
►►The sheath heater dg47-00068a is compatible with many samsung electric oven models, such as NE59J7630SB/AA, NE59J7630SG/AA, and NE59J7630SS/AA, NE59J7630SW/AA, NE59J7650WS/AA, NE59J7750WS/AA, NE59J7750WS/AC, NE59J78...
►►The DG47-00068A baking element is installed in the upper part of the electric oven to provide the high-temperature radiant heat required for the baking function. After power is applied, the internal nickel-chromium ...
►►Electrical Safety: Ensure the power is disconnected during installation. Both circuit breakers must be switched off simultaneously. Use a multimeter to confirm there is no voltage inside the oven before proceeding. ...
►►The DG47-00068A samsung Range Grill Heater Sheath undergoes rigorous inspection before leaving the factory, ensuring superior quality. Providing you with a pleasant shopping experience is our service principle. Duri...

Check Price on Amazon

What the DG47-00068A does

The broil element is an exposed heating coil located at the top of the oven cavity. It provides intense direct heat for broiling food.

Symptoms when this part fails

Oven not broiling food
Element not heating up
Visible breaks or blisters on the element
Oven taking too long to broil
Food not cooking evenly when broiling

Compatibility

Fits the Samsung family. Specifically:

Any unit originally equipped with OEM part number(s): AP5967647, 4010991, PS11720673, EAP11720673, ASM486907, PD00065857.
Check the model/rating plate inside your appliance and compare it against the fitment table on the product listing before ordering — this guide does not list specific compatible models because Amazon does not provide verified fitment data through this pipeline.

Also replaces: AP5967647, 4010991, PS11720673, EAP11720673, ASM486907, PD00065857

Tools you'll need

Screwdriver
Nut driver
Pliers
Work gloves

Difficulty: Moderate · Time: 30-60 minutes

How to install the DG47-00068A, step by step

Disconnect power to the oven at the breaker.
Open the oven door and locate the broil element.
Remove mounting screws securing the element.
Carefully pull the element forward to expose electrical connections.
Disconnect the two electrical wires from the element terminals.
Connect the wires to the new broil element terminals.
Push the new element into place and secure with mounting screws.
Restore power and test the broil function.