How do I know if my water inlet valve is bad?

Common signs of a faulty water inlet valve include the washer not filling with water, filling too slowly, or continuously filling even when off. Leaks around the water connection point or unusual noises during the fill cycle can also indicate a problem. Checking the valve's solenoids for continuity with a multimeter can confirm failure.

Can I clean a water inlet valve instead of replacing it?

While some minor clogs in the inlet screens can be cleaned, the internal components of a water inlet valve, especially the solenoids and diaphragms, are generally not repairable. If the valve is failing to open or close properly, replacement is typically the recommended solution rather than attempting to clean or repair it.

Why is my washing machine leaking from the back?

Leaks from the back of a washing machine often stem from issues with the water inlet valve or the hoses connected to it. This could be due to loose hose connections, damaged fill hoses, or a crack in the valve housing itself. A faulty internal seal within the valve can also cause water to seep out.

LG Washer Water Inlet Valve Replacement Guide

Appliance Aid takes part in the Amazon Associates programme. Some links on this page are affiliate links, and a qualifying purchase earns us a commission. Your price is unchanged.

🏆 RECOMMENDED PART

5220FR2006H Washer Inlet Valve replacement Kenmore, LG, Kenmore Elite washer hot water inlet valve - Replaces 5220FR2006Q,AH3527427,EA352742

𝙄𝙈𝙋𝙊𝙍𝙏𝘼𝙉𝙏 𝙏𝙄𝙋𝙎 Due to variations in production batches, the electrical connector you receive may be oriented at a 90-degree angle. You may reinstall it in accordance with the instructional video provided.
【5220FR2006H WASHER WATER INLET VALVE】--- 5220FR2006H Washing Machine Water Inlet Valve for Hot Water controls the water flow into the washer, helping to achieve the perfect wash cycle every time.The specification of ...
【PACKAGE INCLUDES】---Includes 1 x 5220FR2006H Washer Hot Water Inlet Valve.The replacement part is made from high quality material and well-tested by the manufacturer. If your washing machine has any of the following ...
【90 DAYS WARRANTY】--- 5220FR2006H Washer Water Inlet Valve for Hot Water supports supports 90 days return and exchange.Our company attaches great importance to the shopping experience of each customer.Risk-free shoppi...
【HIGH COMPATIBILITY】---The 5220FR2006H hot water washing machine inlet valve is suitable for washing machines of L-G and Ken-more brands.replaces models 5220FR2006L, 5220FR2006Q, 1268123, AP4441935, PS3527427, EAP3527...

Check Price on Amazon

What the 5220FR2006H does

The water inlet valve controls the flow of hot and cold water into the washing machine tub during fill cycles. It opens and closes electrically based on signals from the control board.

Symptoms when this part fails

Washing machine not filling with water
Slow water fill
Water continuously fills or overflows
Leaking near the water inlet connection
Error codes related to water supply

Compatibility

Fits the LG family. Specifically:

Any unit originally equipped with OEM part number(s): 5220FR2006Q, AH3527427, EA3527427, PS3527427, AP4441935, 1268123, 5220FR2006L.
Check the model/rating plate inside your appliance and compare it against the fitment table on the product listing before ordering — this guide does not list specific compatible models because Amazon does not provide verified fitment data through this pipeline.

Also replaces: 5220FR2006Q, AH3527427, EA3527427, PS3527427, AP4441935, 1268123, 5220FR2006L

Tools you'll need

Pliers
Screwdriver (Phillips and/or flat-head)
Adjustable wrench
Bucket or towels

Difficulty: Moderate · Time: 30-60 minutes

How to install the 5220FR2006H, step by step

Unplug the washing machine and turn off water supply valves.
Disconnect hot and cold water hoses from the back of the washer.
Remove the rear access panel or top panel to expose the valve.
Disconnect electrical connectors and remove mounting screws from the old valve.
Carefully detach the internal water hoses from the old valve.
Install the new water inlet valve, securing hoses, screws, and electrical connections.
Reattach the access panel, connect water hoses, and turn on water supply.
Plug in the washer and test for leaks and proper function.

Related troubleshooting

If swapping this part doesn't fix the issue, check these next:

Washing Machine Fills With Water Then Stops? 7 Fixes