How do I know if my convection fan motor is bad?

Common signs include the fan not spinning, unusual noises like grinding or buzzing from the fan area, or food cooking unevenly in convection mode. A multimeter can be used to test the motor's continuity or power supply, but always ensure power is disconnected first for safety.

Can I use my oven if the convection fan motor is broken?

If the motor is only affecting convection mode, you may still be able to use your oven in conventional baking modes. However, continued use with a faulty motor could potentially lead to further issues or noise. It is generally recommended to address the repair promptly for optimal performance and safety.

What causes a convection fan motor to fail?

Over time, wear and tear are the most common causes. Grease buildup, overheating, or electrical surges can also contribute to motor failure. Bearings can wear out, leading to noise or seizure, or electrical windings can fail, preventing the motor from spinning.

Oven Convection Fan Motor: Symptoms, Repair & Replacement

Appliance Aid takes part in the Amazon Associates programme. Some links on this page are affiliate links, and a qualifying purchase earns us a commission. Your price is unchanged.

🏆 RECOMMENDED PART

DG31-00014F Convection Fan Motor

Compatible With Models:Compatible With NX58M6630SS/AA-00,NX58H5650WS/AA-02,NX58J7750SG/AA-00,NX58F5700WS/AA-04,NX58F5700WS/AA-03,NX58M5600SW/AA-00,NX58F5700WS/AA-02,NX58R9421ST/AA-00,NX58M9420SS/AA-00,NX58J7750SS/AA-0...
Compatible With Models:Compatible With NX58K9850SG/AA-01,NX58H9950WS/AA-01,NX58H9950WS/AA-00,NX58K9850SG/AA-02,NX58K7850SS/AA-00, NX58M6850SG/AA-00,NX58H5600SS/AA-01,NX58J5600SG/AA-00,NX583G0VBWW/AA-02,NX58K9500WG/AA-...
Easy to install：Save money vs. full oven replacement; direct swap, minimal tools required
Wide Fitment: Works with Samsung gas/electric ranges: NX58 series, NE63 series, FX710BGS and more.
Quality Service:If you have any questions or dissatisfaction with the product,Please contact us in a timely manner.Fecttkk will provide you with the most satisfactory response.

Check Price on Amazon

What the DG31-00014F does

The convection fan motor powers the fan that circulates hot air evenly throughout the oven cavity. This circulation helps cook food more uniformly and can reduce cooking times.

Symptoms when this part fails

Oven not heating evenly
Fan making loud grinding or buzzing noises
Convection fan not spinning
Oven taking longer to preheat
Error codes related to fan operation

Compatibility

Fits the Samsung family. Specifically:

Any unit originally equipped with OEM part number(s): NX58M6630SS, NX58K9850SG.
Check the model/rating plate inside your appliance and compare it against the fitment table on the product listing before ordering — this guide does not list specific compatible models because Amazon does not provide verified fitment data through this pipeline.

Also replaces: NX58M6630SS, NX58K9850SG

Tools you'll need

Screwdriver (Phillips and/or flathead)
Nut driver or socket set
Pliers
Work gloves
Multimeter (for diagnosis)

Difficulty: Moderate · Time: 30-60 minutes

How to install the DG31-00014F, step by step

Disconnect power to the oven at the circuit breaker.
Remove the oven door (if necessary for access).
Access the rear panel or interior oven cavity where the fan is located.
Carefully disconnect wiring and mounting screws from the old motor.
Remove the old convection fan motor and fan blade.
Attach the fan blade to the new motor and install the new motor.
Reconnect wiring and secure all panels and screws.
Restore power and test oven function.

Related troubleshooting

If swapping this part doesn't fix the issue, check these next:

What is a Convection Oven and How Does it Cook Faster?