Why is my dishwasher not filling with water?

A common cause for a dishwasher not filling with water is a faulty water inlet valve. The valve might be stuck closed or have an electrical malfunction preventing it from opening to allow water into the tub. Other potential causes include a clogged screen or issues with the float switch.

Can a faulty water inlet valve cause leaks?

Yes, a faulty water inlet valve can definitely cause leaks. If the valve's seal is compromised or if it cracks, water can escape, leading to puddles under or around the dishwasher. Leaks can also occur if the valve fails to close properly, leading to continuous filling and potential overflow.

How do I test a dishwasher water inlet valve?

To test a water inlet valve, first disconnect power and water. Visually inspect for cracks or clogs. You can use a multimeter to check for continuity across the solenoid terminals; a lack of continuity often indicates a failed solenoid. You can also check if 120V AC is reaching the valve when it should be open.

Whirlpool Dishwasher Water Inlet Valve Repair Guide

Appliance Aid takes part in the Amazon Associates programme. Some links on this page are affiliate links, and a qualifying purchase earns us a commission. Your price is unchanged.

🏆 RECOMMENDED PART

(2026 Upgraded) W10327249 W10327250 W11175771 Dishwasher Water Inlet Valve Fit for Whirlpool,Kenmore 665 662 series,KitchenAid,Amana -Replac

𝟏𝟓 𝒀𝑬𝑨𝑹𝑺 𝙂𝙐𝘼𝙍𝘼𝙉𝙏𝙀𝙀--- 𝑺𝑼𝑷𝑷𝑶𝑹𝑻 𝟏𝟓 𝒀𝑬𝑨𝑹𝑺 𝘼𝙁𝙏𝙀𝙍-𝙎𝘼𝙇𝙀𝙎 𝙎𝙀𝙍𝙑𝙄𝘾𝙀. Beaquicy attaches great importance to the shopping experience of each customer.If you have any quality problem during guarantee period,please contact custome...
𝐎𝐄𝐌 𝐖𝟏𝟎𝟑𝟐𝟕𝟐𝟒𝟗 𝐃𝐈𝐒𝐇𝐖𝐀𝐒𝐇𝐄𝐑 𝐖𝐀𝐓𝐄𝐑 𝐈𝐍𝐋𝐄𝐓 𝐕𝐀𝐋𝐔𝐄---The W10327249 Water Inlet Valve is for dishwasher. The dishwasher inlet valve controls the timing and flow of water into the dishwasher. The connecting solenoid on the valv...
𝟏𝟎𝟎% 𝐁𝐑𝐀𝐍𝐃 𝐍𝐄𝐖 𝐀𝐍𝐃 𝐇𝐈𝐆𝐇 𝐐𝐔𝐀𝐋𝐈𝐓𝐘---The W10327249 W10327250 Dishwasher Water Inlet Valve is made of high quality ABS Plastic and Stainless Steel Metal materials for excellent durability. High quality materials add to th...
𝐌𝐔𝐋𝐓𝐈-𝐌𝐎𝐃𝐄𝐋 𝐂𝐎𝐌𝐏𝐀𝐓𝐈𝐁𝐈𝐋𝐈𝐓𝐘---The W10327249 Dishwasher Water Inlet Valve can fit for Jenn-Air, Kenmore, Kitchen-Aid, Whirlpool, May-tag dishwasher. W10327249 replace: 3015511, AP6019618, PS11752927, EAP11752927.►W103272...
𝐁𝐑𝐈𝐍𝐆 𝐂𝐎𝐍𝐕𝐄𝐍𝐈𝐄𝐍𝐂𝐄 𝐓𝐎 𝐘𝐎𝐔𝐑 𝐋𝐈𝐅𝐄---Installation of W10327249 W10327250 Water Inlet Valve is simple. Before installation, disconnect the dishwasher from the power and water supply and wear work gloves to protect your han...

Check Price on Amazon

What the W10327249 does

The water inlet valve controls the flow of water into the dishwasher tub during wash cycles. It opens to allow water in and closes to prevent leaks.

Symptoms when this part fails

Dishwasher not filling with water
Dishwasher continuously filling or overflowing
Leaks near the bottom of the dishwasher
Unusual buzzing or humming noise during fill cycle
Poor wash performance due to insufficient water

Compatibility

Fits the Whirlpool family. Specifically:

Any unit originally equipped with OEM part number(s): W10195047, 3015511, AP6019618, PS11752927, EAP11752927.
Check the model/rating plate inside your appliance and compare it against the fitment table on the product listing before ordering — this guide does not list specific compatible models because Amazon does not provide verified fitment data through this pipeline.

Also replaces: W10195047, 3015511, AP6019618, PS11752927, EAP11752927

Tools you'll need

Screwdriver
Pliers
Adjustable wrench
Towels
Bucket

Difficulty: Moderate · Time: 30-60 minutes

How to install the W10327249, step by step

Disconnect power and turn off water supply to the dishwasher.
Remove the lower access panel and kick plate.
Locate the water inlet valve, typically at the front-left bottom.
Disconnect the water supply line and electrical wires from the valve.
Remove mounting screws and detach the old valve.
Install the new valve, reconnecting water line and wires.
Replace access panel, restore water and power, check for leaks.

Related troubleshooting

If swapping this part doesn't fix the issue, check these next: