Refrigerator Condenser Fan Motor Replacement Guide

What the 00601016 does

The condenser fan motor circulates air across the condenser coils, dissipating heat from the refrigerant.

Symptoms when this part fails

• Refrigerator not cooling effectively
• Loud buzzing or grinding noise from the rear of the fridge
• Compressor overheating or running constantly
• Increased energy consumption
• No airflow over condenser coils

Compatibility

Fits the Bosch family. Specifically:

• Any unit originally equipped with OEM part number(s): 00601016.
• Check the model/rating plate inside your appliance and compare it against the fitment table on the product listing before ordering — this guide does not list specific compatible models because Amazon does not provide verified fitment data through this pipeline.

Tools you'll need

• Screwdriver (Phillips/Flathead)
• Nut Driver
• Pliers
• Multimeter

Difficulty: Moderate · Time: 30-60 minutes

How to install the 00601016, step by step

1. Disconnect the refrigerator from power.
2. Pull the refrigerator away from the wall.
3. Locate and remove the rear access panel.
4. Disconnect wiring from the old fan motor.
5. Remove mounting screws and old fan motor.
6. Install the new fan motor and reconnect wiring.
7. Replace the rear access panel.
8. Restore power and test refrigerator operation.

Related troubleshooting

If swapping this part doesn't fix the issue, check these next:

• How to clean refrigerator condenser coils: Whirlpool, LG, Samsung, Haier and more
• French Door Refrigerator Bottom Freezer Not Cold? Evaporator Fan Fix